Learn how to take advantage of the APIs available in the API Explorer Application in MyGeotab.

Leverage telematics data to detect potential collisions using the Collision Detection Add-in in My Geotab.

Learn more about the Geotab Centralized Identification and Access Management (CIAM) user management experience across all Geotab platforms.

The Cold Chain feature allows you to monitor engine data, sensor readings, and any other diagnostics data sent to the database from all assets at a glance.

Learn how to leverage telematics data to detect potential collisions using the new Collision Detection Rule in MyGeotab.

Learn about the Collision Reconstruction App by browsing frequently asked questions.

Continuous data connection (previously referred to as Continuous Connect) is a part of the Device behavior override feature.

The DIG API provides a primary endpoint to enable integrators to send bulk custom telematics device records to MyGeotab using the /records endpoint.

Browse frequently asked questions about the Electric Vehicle Suitability Assessment Add-in.

Use the EV Suitability Assessment Add-in to determine if your non-electric vehicle could be replaced by an EV.

This document provides detailed information about the Clean Truck Check program implemented by the California Air Resources Board (CARB).

Browse frequently asked questions to better understand Geotab's Emissions Diagnostics.

Manufacturer self-declaration that IOX-KEYLESS conforms to EU Radio Equipment Directive requirements.

Manufacturer self-declaration that the IOX-NFCREADERA conforms to EU Radio Equipment Directive requirements.

Manufacturer self-declaration that the IOX-SATIRDv2 conforms to EU Radio Equipment Directive requirements.

Learn how to install and configure the Digital Tachograph Remote Company Card Server. The DTRCO-RCS software is critical for auto-connecting company cards to the tachograph remotely.

Learn how to use the EV Charge Assurance Add-in to help ensure your EVs are charged and diagnose charging problems.

Learn how to use the Electric Vehicle Charging Cost Add-in to report on the cost of electric energy.

This document outlines the setup process required to systematically import Fleetcor fuel card transactions into a MyGeotab database.

Learn more about the Fuel Transaction Import Add-In, which allows users to import Fill-up transactions extracted by the fuel provider’s application/service into MyGeotab.

Learn how to use various fuel-saving features in MyGeotab.

The Geotab Camera Add-In for the Surfsight camera allows users to view live video feeds and video recordings, create rules and exceptions to detect distracted driving behavior and harsh driving conditions, and much more.

This document provides a detailed definition for the columns available in each of the data assets when utilizing the Geotab Data Connector tool provided to you within the Data Schema and Dictionary resources.

Geotab’s Data Connector Maintenance Insights leverages rich data to provide clear and compelling insights on common Maintenance Issues.

The Geotab Data Connector tool was designed for Fleet Managers to import curated data from numerous Geotab data sources, sourced from their own fleet, into their preferred BI/visualization tool. The tool allows Fleet Managers to access aggregated data into a BI tool without having to manually leverage MyGeotab reports.

Geotab’s Data Connector Predictive Safety Analytics and Safety Benchmarking is an innovative approach that leverages driver behavior data and machine learning to anticipate and prevent safety incidents.

Templates provided for the Geotab Data Connector can be downloaded either from the User Guide, or directly from the Data Connector add-in page.

The Geotab Data Connector tool was designed for Fleet Managers to import curated data from numerous Geotab data sources, sourced from their own fleet, into their preferred BI/visualization tool.

Learn more about the Geotab Data-Only Plan API, which provides a wrapper around the MyGeotab .NET API.

Learn how to use the Geotab Drive Add-In SDK, including startup, shutdown, and notifications functions.

This document provides information about the Geotab IOX-WRKS installation process with an optional add-on LED tool.

Learn more about the Geotab Keyless SDK Logging pre-release.

The Geotab Keyless System allows for the simultaneous storage of up to four distinct stored Virtual Keys (reservations) locally on the GO device that can be accessed via Geotab Keyless NFC tags (tapCards).

Learn more about the Geotab Keyless SDK Logging Schema.

Learn more about the Green Fleet Dashboard, a Marketplace Add-in that helps improve fuel economy and reduce emissions.

Learn more about Intelligent Zoning, a tool that uses vehicle stop history to automatically create new zones in MyGeotab.

Learn more about IOX-ALERT, which allows a driver to send a notification to a dispatcher by pressing an alert button.

Learn more about IOX-ANALOG, which enables the GO device to read analog signals from a vehicle and its connected accessories.

Learn more about IOX-AUXM, which monitors up to 8 signals from your vehicle in real-time.

Learn more about IOX-BATTERY, a battery backup solution for GO9 devices and GO9 RUGGED devices (with adapter).

Use this visual aid to help you install an IOX-BATTERY with your GO device.

Learn more about IOX-BT, which monitors Bluetooth proximity beacons and supports select sensor-enabled beacons.

Learn more about IOX-BUZZ, an external buzzer which amplifies in-vehicle audio feedback from the GO device.

Learn more about IOX-CAN, which integrates third-party data with MyGeotab software, allowing supplementary fleet data collection.

Learn more about IOX-COMSPREAD, which allows solid and liquid material controllers to send data to MyGeotab.

Learn more about IOX-CRS, which allows the CIRUS CONTROLS SpreadSmart Rx system to send data to MyGeotab via a GO device.

Learn more about IOX-DJ, which allows the DICKEY-john Control Point control system to send data to MyGeotab via a GO device.

Learn more about IOX-FAM, which integrates the FORCE AMERICA 5100ex Spreader Control system with MyGeotab.

Learn more about GARMIN IOX, which integrates GARMIN devices with MyGeotab for enhanced driver-dispatcher communication.

Learn more about GO TALK, which provides real-time feedback to drivers about their performance to improve driving.

Learn more about IOX-HID, which allows the GO device to interface with an HID card reader to read multiple ID cards.

The IOX-KEYBOX allows remote access to a vehicle without requiring an embedded key or digital OEM support. The device supports multiple markets including corporate car sharing, consumer car sharing, and traditional car rental services.

Learn more about IOX-KEYLESS, which supports remote access to a vehicle and supports multiple markets.

Learn more about IOX-NFCREADERA, which integrates Near Field Communication (NFC) with the GO device to identify drivers.

Learn more about IOX-OUTPUTM, which allows a GO device to control a relay from the vehicle in real-time.

The IOX-RS232 allows external devices — gas detection monitors, weighing scales, or pressure monitors — to send data through the Geotab® GO™ device to MyGeotab™.

Learn more about IOX-SATIRDv2, which allows GO devices to communicate over the IRIDIUM Network.

Learn how the IOX-UREADER supports tachograph, contactless CAN clamp, and cold chain transportation data logging functionality.

Learn how to install the IOX-UREADER, including how to install CAN bus clamps and Cold Chain IP boxes.

Learn more about IOX-USB, which includes an auxiliary USB power adapter for charging and powering USB devices.

Learn more about IOX-WRKS, a Public Works solution focusing on vehicles in the winter operations.

Learn how to install a GO device in your winter operations vehicle using the IOX-WRKS solution.

Learn the best practices for the placement and installation of sensors used in the IOX-WRKS solution.

Use this visual aid to help you install the IOX-WRKS solution in your vehicle.

The Keyless Lite Solution by Geotab enables your fleet to easily share vehicles – locate, unlock and lock – from a simple mobile phone application using virtual keys.

Keyless Monitor is a MyGeotab Add-In enabling Integrators, Partners, and Customers to configure, control, and monitor Geotab Keyless hardware.

Keyless Monitor is a MyGeotab Add-In enabling Integrators, Partners, and Customers to configure, control, and monitor Geotab Keyless hardware.

The Maintenance Operations page simplifies Work Order Management by streamlining your maintenance processes and ensuring the longevity of your assets.

This feature provides a seamless experience for completing maintenance tasks and ensuring that your vehicles and assets are always in top condition.

Learn more about the MyGeotab API Adapter, which allows streaming of data from MyGeotab into external systems.

The MyGeotab API Adapter uses data feeds to pull the most common data sets from a MyGeotab database and stream the data into tables within a supported relational database.

Phillips Connect asset trackers collect data on location and asset health, as well as driving behavior and fleet productivity with unparalleled asset utilization metrics that drive financial ROI.

Learn how to interface with various spreader controllers commonly installed by Public Works agencies.

Learn how to set up a database and install and provision the IOX-WRKS for a Public Works Customer.

This user guide describes the Purge feature in the Fleet Management Application, intended to be used by Database Admins, outlining how to use the feature, categories for purge, retention time periods, and FAQs.

Ordering IOX Keyless means you are purchasing the IOX-KEYLESS hardware fully integrated with your vehicle keys.

Learn more about the Keyless is Geotab’s Shared Mobility solution. There are a few components you need to know, so use this document to guide your MyAdmin purchases and quoting.

Learn how to install the Roadside Add-in in MyGeotab, a solution for requesting help for a fleet vehicle.

Learn more about Route Completion configuration using a shapefile import.

This user guide provides the necessary information needed in order to use the Routes feature in the Fleet Management Application.

This document functions as a reference guide for the Routing & Optimization – Administration module in Fleet Management Application.

This document functions as a reference guide for the Routing & Optimization – Dispatch module in the Fleet Management Application.

This document serves as a reference guide for the Routing & Optimization – Route module in the Fleet Management Application.

This document functions as a reference guide for the Routing & Optimization – Mobile module in the Fleet Management Application.

This document functions as a reference guide for the Routing & Optimization – Territory module in the Fleet Management Application.

This guide can be used by any user to add and edit custom rules in the Fleet Management Application.

Service accounts are functionally similar to real user accounts in the MyGeotab database.

Learn how Substance Spreader controllers transmit data to MyGeotab.

Learn how the Tachograph Add-in helps you control and analyze the info generated by vehicles and drivers in your fleet.

Manufacturer self-declaration that IOX-KEYLESS conforms to UKCA regulations.

Manufacturer self-declaration that IOX-NFCREADERA conforms to UKCA regulations.

Learn how to validate the configuration of uReaderGPS and IOX-UREADER devices using the uReader Device Installation Wizard.

This document outlines the setup process required to systematically import Voyager fuel card transactions into a MyGeotab database.

This document outlines the setup process required to systematically import WEX and EFS fuel card transactions into a MyGeotab database.

Learn how to systematically import WEX fuel card transactions into a MyGeotab database.