Quick Guide to Keyless Ordering
Support Document
0 mins to read
Learn more about the Keyless is Geotab’s Shared Mobility solution. There are a few components you need to know, so use this document to guide your MyAdmin purchases and quoting.
December 2024
Introduction
Keyless is Geotab’s Shared Mobility solution. There are a few components you need to know, so use this document to guide your MyAdmin purchases and quoting.
The focus of this reference is on the Keyless specific components. Additional standard components:
- GO device (GO9 or newer): IOX Keyless or IOX Keybox connects into a GO via the IOX port.
- T-harness: supports OBD port access by service personnel without disrupting Keyless.
✱ NOTE - T-harness: For both push-to-start and bladed key ignition installations, the T-harness is used to install the GO device away from the OBD port to reduce the risk of accidentally unplugging the device. The T-harness is also used to install another device into the OBD port without having to remove the GO9 device. The most common harness is the HRN-GS16K2-A; however, harness installation depends on the vehicle. See Geotab’s harness assessment cheat sheet.
IOX Keyless or IOX Keybox
Both are interchangeable options compatible with the Keyless Solution. If you are unsure, please review the Hardware Options in the Keyless Overview.
IOX Keyless: Bluetooth and Remote Command Access
Standard access support is via Bluetooth and remote commands.
MyAdmin SKUs | Description | References |
IOX-Keyless-NK | For ordering just the hardware ready for key fob integration by an external partner. | |
IOX-Keyless Add: SPR-QRTAG | For US and Canadian customers, Geotab offers key fob integration services. This SKU is for the hardware with the key fob integrated by Geotab. Do not order this IOX Keyless without reviewing the ordering process: Quick Guide to IOX-Keyless Ordering | |
HRN-CX10S4 | An optional starter inhibit relay for cases where a secondary bladed key is needed to start the vehicle. If installed, IOX Keyless will invoke this relay alongside unlocks and locks, enabling and disabling the ignition. Not supported by IOX Keybox. | Geotab Keyless Starter Inhibit Overview and Installation for the HRN-CX10S4 Harness |
IOX Keybox: Bluetooth and Remote Command Access
Standard access support is via Bluetooth and remote commands.
MyAdmin SKUs | Description | References |
IOX-Keybox | Each Keybox is built to fit a specific key fob. Follow the MyAdmin flow to choose the key fob variant from the catalog, and specify it as part of your MyAdmin check out process. Ships with harness (HRN-Keybox). | Keybox Catalog: find specific variants
|
HRN-Keybox | Harness for IOX-Keybox, to connect the IOX-Keybox to the GO. This SKU is for ordering replacements (e.g. RMAs). Do not order for new installations; already included in the IOX-Keybox SKU. |
Adding NFC Tap Card Access for IOX Keyless or IOX Keybox
In addition to the SKUs above, should the customer wish to add NFC tap card access, reference SKUs below.
MyAdmin SKUs | Description | References |
IOX-NFCREADERA | This is our standard NFC Reader, also used for Driver ID. When it’s installed alongside Keyless hardware, it automatically switches to providing Keyless vehicle access. | |
SPR-NFCBRKTV2ASY | Adhesive removable bracket which front-mounts IOX-NFCREADERA to a vehicle windshield, allowing the driver to tap through the windshield.
| |
GEO-KLNFCFOB
| High security grade tap cards compatible with Keyless. Order one per driver.
The following Driver ID tap cards / fobs are not compatible with Keyless:
|
For Shared Mobility Software Integrators: Keyless Dev Kit
For Development teams seeking to test their integrations.
MyAdmin SKUs | Description | References |
SPR-KEYLESSDEVKIT | Includes support for IOX Keyless, and support for IOX Keybox coming in a future version. Requires additionally:
|
For IOX-Keyless-NK Key Fob Integrators: Testing Device
For any entities who are looking to test their key fob integrations.
MyAdmin SKUs | Description | References |
SPR-NKTSTR | Verify key fob solder connections. |
