Learn about accelerometers and how accelerometer data is used in telematics.

Connect a GO device to your vehicle using the HRN-RW04K4 (Differential Harness).

Learn how to set up your company, vehicles, and drivers for Hours of Service (HOS) compliance using Geotab Drive.

Learn to use the Drive App, as part of the greater Cloud ELD solution, the Drive App (running on a compatible mobile device), is used together with a Telematics Device.

A checklist designed to help you ensure proper hardware and software installation in the Drive App.

Learn how to perform an asset inspection in the Geotab Drive App to determine if your vehicle requires repairs.

Learn how to transfer data at roadside checks, set a security PIN, and check previous asset inspections.

Learn about diagnostic and malfunction events and compliance standards for both USA and Canada.

Learn how to use the Drive App for basic driver functions such as managing HOS and performing asset inspections.

Learn how to use the Drive App to maintain Hours of Service compliance as a driver.

The Work Diary App is a work management system for drivers, with Australian rulesets. Drivers use this free-of-charge app together with a Geotab GO device to record their hours of rest or work, to minimise fatigue and aid in the completion of paper logbooks.

Learn about driving and charging/battery data and access with support notes for GO7, 8 and 9 devices.

Using advanced analytics techniques, Geotab has developed a model capable of detecting collisions when they happen to present critical information on point of impact and magnitude.

Manufacturer self-declaration that the HRN-HLAEGAH is in compliance with all applicable EU Directives, and satisfies CE marking requirements, when used for its intended purpose.

Manufacturer self-declaration that the HRN-HTKDSR is in compliance with all applicable EU Directives, and satisfies CE marking requirements, when used for its intended purpose.

Connect a GO device to your vehicle using the HRN RZ04S4 (Ford EDI TUG Harness).

Use this visual aid to help you install the HRN-CL24T2 harness in your vehicle.

Learn how to complete advanced installations of the GO device.

Learn how to use Offline Mode in Geotab Drive to provide maximum access to vehicle data.

Explore resources to help you understand the basics behind Hours of Service, ELDs, and compliance.

Browse resources and information about telematics devices, engine data, and more.

Learn more how to install the Geotab Garmin Bundle and review key technical specifications for the bundle.

Browse frequently asked questions about the Geotab Garmin Bundle, including features, billing, device admin, and more.

Learn more about the features and technical specifications of the GO Anywhere, Geotab's first generation asset tracker that allows you to maintain visibility over the Telematics Fleet Management Application.

Learn how to install a GO device in European heavy-duty vehicles using HRN-ES12S1.

Learn how to install a GO device on a Mercedes Sprinter using HRN-UP21Y2.

The Geotab Keyless System allows for the simultaneous storage of up to four distinct stored Virtual Keys (reservations) locally on the GO device that can be accessed via Geotab Keyless NFC tags (tapCards).

Learn more about the Geotab Keyless Starter Inhibit feature, including how to install it using the HRN-CX10S4 harness.

This document contains all the essential information that you, the Partner, need to use the Geotab Marketplace Order Now program to facilitate purchases of Geotab and third-party products.

This document answers common questions regarding the Surfsight camera kit available through the Geotab Order Now Program.

Browse frequently asked questions about the return process at Geotab.

Review installation instructions for GO devices and IOXs, and access more resources in the documentation library.

With the dash cam, you can harness the power of video to connect your fleet vehicles, help protect your drivers on the road, and save lives.

Browse frequently asked questions about the installation process for GO9 and GO9 Rugged devices.

Connect a GO device to Rail Service vehicles (including Hi-Rail).

This document provides information on how to successfully troubleshoot a faulty GO Device.

Learn how to de-pin and re-pin a GO RUGGED device.

Learn how to safely install your telematics device.

Learn about the features and technical specifications of the GO7 RUGGED, a ruggedized telematics device.

Learn more about the features and technical specifications of the Geotab GO7 device.

Use this visual aid to help you install a GO8 device in your vehicle.

Learn more about the features and technical specifications of the Geotab GO8 device.

Follow this installation guide to install and verify a GO9 device in your vehicle.

Use this visual aid to help you install a GO9 device in your vehicle.

Learn how to install a GO9 in the Mitsubishi Fuso 2010-2021 using the HRN-GS16K2 and HRN-BU16Y5 harnesses.

Learn how to install the GO RUGGED device in your vehicle.

Learn about the features and technical specifications of the GO9 RUGGED, a ruggedized telematics device.

Learn more about the features and technical specifications of the Geotab GO9 device.

Follow this installation guide to install and verify a GO9+ device in your vehicle.

Browse frequently asked questions about the GO9+ device installation process.

Use this visual aid to help you install a GO9+ device in your vehicle.

Learn more about the technical specifications and features of the GO9+ device, an expandable device with Wi-Fi hotspot.

Follow this installation guide to install and verify a GO9B device in your vehicle.

Follow this installation guide to install and verify a GO9B device in your vehicle.

Browse frequently asked questions about the GoAnalytics, a powerful analytical tool crafted to deliver comprehensive analysis and visualizations of fleet-related data.

This document provides an overview of how to navigate and use the GoAnalytics platform.

Learn more about the GPS Curve Log reasons, based on the Ramer-Douglas-Peucker algorithm.

GPS involves calculating four unknown values: latitude, longitude, altitude, and time. The signals from the satellites must be received with sufficient quality to calculate the position.

Learn more about using harnesses to connect a GO device to your vehicle.

Browse harness types and review harnesses for specific use cases.

Connect a GO device to your vehicle using HRN-BD16S1.

Use this visual aid to help you install HRN-CE04A4 in your vehicle.

Connect a GO device to your Volvo vehicle using HRN-CE10K2 and HRN-CM24Y1 harnesses.

Connect a GO device to your Mack truck using HRN-CK10K2 and HRN-CM24Y1 harnesses.

Connect a GO device to your 2019+ Mack truck using HRN-CE10K2 and HRN-CM24Y1 harnesses.

Connect a GO device to your 2019+ Mack (MR Series) Cab Over vehicle using HRN-ES12S1.

Connect a GO device to your Hino truck using HRN-CM24Y1 and HRN-CH06A2 harnesses.

Connect a GO device to your 2019+ Hino truck using HRN-CM24Y1 and HRN-CH10A2 harnesses.

Connect a GO device to your Isuzu vehicle using the HRN-CM24Y1 and HRN-CI04A2 harnesses.

Connect a GO9 device to your Mercedes Sprinter 2500 using HRN-CM24Y1 HRN-CP04A2 harnesses.

Connect a GO device to your vehicle using the HRN-CS14S21 harness.

Connect a GO device to your vehicle using HRN-CS14T2.

Learn more about connecting a GO device to vehicles without a diagnostic port using the HRN-CW03K3 harness.

Use this visual aid to help you install HRN-CW08K4 in your vehicle.

Learn how to connect an IOX using the HRN-IOXEXT IOX extension cable.

Connect a GO RUGGED device to your vehicle using the HRN-RW07T1 harness.

Connect a GO device to your vehicle using the HRN-RZ04T4 (Kubota TUG Harness).

Connect HRN-TNULL to compatible cameras.

Connect a GO Device to your 2019 and later Volvo vehicle using HRN-CE10K2 and HRN-CM24Y1 harnesses.

Partners can order installation services from Geotab. When these services are ordered, Geotab will work with the Partner, Customer, and Geotab Authorized Installer to ensure installations are performed efficiently and in accordance with Geotab's standards.

Use Geotab's email and online tools to help successfully complete installations on the first try.

Learn how to implement the J1939 signal set for GO device compatibility.

Learn more about the full suite of IOX-KEYLESS documentation, including installation of GO9 devices with a T-harness, NFC readers, and Start Inhibit.

The Keyless Lite Solution by Geotab enables your fleet to easily share vehicles – locate, unlock and lock – from a simple mobile phone application using virtual keys.

Keyless Monitor is a MyGeotab Add-In enabling Integrators, Partners, and Customers to configure, control, and monitor Geotab Keyless hardware.

Learn more about the limitations of use for GO devices.

A list of the vehicles requiring the ALDL Shunt, categorized according to year, make, and model.

Learn more about how MyGeotab supports Single Sign-On (SSO) user authentication via the SAML 2.0 specification.

Learn how to pull and utilize Geotab vehicle data collected from Electric Vehicles (EVs).

Learn how to use the MyInstall tool, including how to create MyInstall logins and perform device installation checks.

Learn more about the advantages and disadvantages of the RP1226 connector.

Browse frequently asked questions about the On-Board Diagnostic port and telematics devices.

Connect a GO device to your vehicle using the HRN-RW03K5 (Pulse Harness).

Learn how to install the Rugged device, designed to withstand exposure to weather elements and environmental particulates.

Browse frequently asked questions about the Ruleset Switcher Add-in in the Drive App.

Safety Center is used by Fleet Administrators who have access to entire fleets or groups of fleets to manage safety risks, and make decisions based on objective safety data, such as predictive collision risk.

Browse frequently asked questions about the Short Haul Switcher (60-hr/7-day) Big Day Add-in.

Review the technical specs for SPR-RELAYKIT, which incorporates controls for enabling a relay directly from the GO device.

The HRN-GS16K22-A harness kit is designed and intended for use only with the GO device or Geotab-authorized accessory devices.

The HRN-GS16K22-A harness kit is designed and intended for use only with the GO device or Geotab-authorized accessory devices.

With the dash cam, you can harness the power of video to connect your fleet vehicles, help protect your drivers on the road, and save lives.

Learn how the Sustainability Center is used by Fleet Administrators who have access to entire fleets to review trends, and make decisions based on objective energy and fuel data.

Learn more about the HRN-GS16K2 harness, used to connect GO devices to light- and medium-duty vehicles internationally.

Use this visual aid to help you install the HRN-GS16K2 universal harness kit in your vehicle.

Connect a GO device to your heavy-duty vehicle using a HRN-GS09K2 harness.

Learn how to install a GO9 device in the Tesla Model Y using the HRN-CT26T1 harness.

Manufacturer self-declaration that the HRN-HLAEGAH is in compliance with all applicable UKCA regulations, when used for its intended purpose.

Manufacturer self-declaration that the HRN-HTKDSR is in compliance with all applicable UKCA regulations, when used for its intended purpose.

Keyless Monitor is a MyGeotab Add-In enabling Integrators, Partners, and Customers to configure, control, and monitor Geotab Keyless hardware.

Use this visual aid to help you install the HRN-GS09K2 harness in your vehicle.

Learn more about the HRN-GR09K1, a ruggedized harness kit used to connect GO RUGGED devices to vehicles internationally.

Use this visual aid to help you install the HRN-GR09K1 harness in your vehicle.

Browse additional notes on installations and vehicles, including installation notes on specific harnesses, hardware selection for different physical environments.