Support Document

•

0 mins to read

Rate Plan Features: Geotab Integrated Solution for GM

Support Document

•

0 mins to read

Learn more about the GO device features available with GM Premium and GM Premium + Driver Feedback Rate Plans, including active tracking, engine management, engine data, and driver feedback. Browse frequently asked questions about the solution and compare the solution to the Base and Pro Rate Plans.

Geotab Integrated Solution for GM

GO Device plans are used for comparison and referred from this document.

Base

(GO)

GM Premium

GM Premium + Driver Feedback (Beta)

Pro

(GO)

ProPlus

(GO)

Availability

Worldwide

US, CA

Worldwide

Hardware Installation

GO device installation required

No additional hardware required for eligible vehicles

GO device installation required

Application

	Base	GM Premium	GM Premium + Driver Feedback (Beta)	Pro	ProPlus
Web-based tracking	✔	✔	✔	✔	✔
Web-based trip log	✔	✔	✔	✔	✔
Support for multiple map types and views	✔	✔	✔	✔	✔
Unlimited customer zone importing, editing and creation (geofencing)	✔	✔	✔	✔	✔
Notifications on zone entry/exit	✔	✔	✔	✔	✔
Flexible group structure for vehicles, zones (customers), users, rules, drivers, and reports	✔	✔	✔	✔	✔
Powerful and customizable business exception rules	✔	✔	✔	✔	✔
Combination exception rules	✔	✔	✔	✔	✔
Email, web-based popup, text message and web service call notifications on rule exceptions	✔	✔	✔	✔	✔
Roadside Add-In for towing, locksmith, battery boost, fuel delivery, flat tire change, & more. USA and Canada only, with fleet-wide utilization of the ProPlus plan. Other conditions apply.	✘	✘	✘	✘	✔
Support Services With fleet-wide utilization of the ProPlus plan.	✘	✘	✘	✘	✔
Privacy Mode	✔	✔	✔	✔	✔
Collision Reconstruction Add-In	✘	✘	✘	✔	✔

Built-In Rules-Based Exceptions

	Base	GM Premium	GM Premium + Driver Feedback (Beta)	Pro	ProPlus
Speeding	✔	✔	✔	✔	✔
After-hours usage	✔	✔	✔	✔	✔
Productivity (idling, arrival/departure times, etc.)	✔	✔	✔	✔	✔
Backup when leaving	✘	✔	✔	✔	✔
Engine diagnostics and issues	✘	✔	✔	✔	✔
Dangerous driving (acceleration, braking, cornering)	✘	Limited (harsh cornering not supported)	Limited (harsh cornering not supported)	✔	✔
Seatbelt usage	✘	✔	✔	✔	✔
Collision	✘	✔ (depends on acceleration data from OEM or requires OnStar AACR package)	✔ (depends on acceleration data from OEM or requires OnStar AACR package)	✔	✔
Low battery warning	✘	✔	✔	✔	✔
Engine misuse (over-revving)	✘	✔	✔	✔	✔

Reports

	Base	GM Premium	GM Premium + Driver Feedback (Beta)	Pro	ProPlus
Over 30 built-in reports	✔	Limited (Fuel Usage & Fill ups reports in BETA)	Limited (Fuel Usage & Fill ups reports in BETA)	✔	✔
Customizable dashboards and reports	✔	✔	✔	✔	✔
Trending dashboards and reports	✔	✔	✔	✔	✔
Report scheduling	✔	✔	✔	✔	✔
Private vs. Business mileage	Limited	✔	✔	✔	✔
IFTA fuel tax reports	Limited	✔	✔	✔	✔
Driver scoring reports	Limited	Limited (harsh cornering not supported)	Limited (harsh cornering not supported)	✔	✔
Risk management reports (insurance use case)	Limited	Limited (harsh cornering not supported)	Limited (harsh cornering not supported)	✔	✔
Customer stops by zone report	✔	✔	✔	✔	✔
Driver congregation report	✔	✔	✔	✔	✔
Customizable work hours, time off, and timecard reports	✔	✔	✔	✔	✔
Collision reconstruction report Reports for devices on Base and Regulatory mode will not include Accelerometer information	✔	✘	✘	✔	✔
Find nearest vehicle to location including distance	✔	✔	✔	✔	✔
Color-coding to signify the status of Garmin-equipped drivers on a map	✘	✘	✘	✔	✔
Maintenance reminders scheduled by time or distance	✔	✔ (based on odometer not engine hours)	✔ (based on odometer not engine hours)	✔	✔
Maintenance reminders scheduled by engine data parameters	✘	✘	✘	✔	✔
Unlimited users	✔	✔	✔	✔	✔
Flexible user access control — features can be hidden or limited based on user or vehicle groups	✔	✔	✔	✔	✔
Ability to audit all database actions	✔	✔	✔	✔	✔
Scalable — up to 50,000 devices in one database	✔	✔	✔	✔	✔
One year of cloud storage with tools for local file export	✔	✔	✔	✔	✔
Industry best practices for security	✔	✔	✔	✔	✔
Best-in-class Tier 2 and Tier 3 engineering support	✔	✔	✔	✔	✔

Engine Management

Base

GM Premium

GM Premium + Driver Feedback (Beta)

Pro

ProPlus

SAE J1939 (including FMS) & J1708
Legacy OBD: SAE J1850 PWM/VPW, ISO 9141-2, and ISO 14230 KWP2000
Single Wire CAN (GM 33.3 kbps, Fiat/Dodge 50 kbps)
ISO 15765 CAN (including WWH-OBD, GMLAN, VW TP2.0) @ 125 kbps, 250 kbps, 500 kbps
Medium Speed CAN @ 125 kbps, 250 kbps, 500 kbps

✘

✔

(check data set for available measurements)

✔

(check data set for available measurements)

✔

Engine Data

(Recorded if supported by the vehicle)

	Base	GM Premium	GM Premium + Driver Feedback (Beta)	Pro	ProPlus
Odometer, Engine Hours and Engine Road Speed	✘	✔	✔	✔	✔
Coolant temperature	✘	✔	✔	✘	✘
Driver's seat belt	✘	✔	✔	✔	✔
Passenger seat occupied	✘	✘	✔ (off by default, can be enabled)	✘	✘
Passenger seatbelt	✘	✘	✘	✘	✘
Total fuel used	✘	✔	✔	✔	✔
Total idle fuel used	✘	✘	✘	✔	✔
Fuel level input (to identify fuel-up events and for data integration with fuel card)	✘	✔	✔	✔ (% only)	✔ (% only)
RPM	✘	✔	✔	✔	✔
Ignition detect	✔	✔	✔	✔	✔
Check Engine Light	✘	✔	✔	✔	✔
Engine faults, including unknown proprietary engine faults	✘	✔	✔	✔	✔
EV driving energy used	✘	✘	✘	✔	✔
EV battery charge % (SOC)	✘	✔	✔	✔	✔
EV charging status	✘	✔	✔	✔	✔
EV charging energy	✘	✔	✔	✔	✔

In-vehicle Audible Alerts / Driver Feedback

	Base	GM Premium	GM Premium + Driver Feedback (Beta)	Pro	ProPlus
Speeding	✔	✘	✔	✔	✔
Driver ID not presented on ignition	✔	✘	✘	✔	✔
Idling	✔	✘	✘	✔	✔
Driving in reverse	✘	✘	✘	✔	✔
Rule violation	Limited	✘	✘	✔	✔
High RPM — target fuel savings	✘	✘	✘	✔	✔
Seatbelt usage detection over user-defined speed	✘	✘	✔	✔	✔
Aggressive driving (acceleration, braking, cornering)	✘	✘	✔ (No cornering)	✔	✔

Drive App

Mobile device/tablet, data plan, and IOX-USB for HOS are extra cost.

	Base	GM Premium	GM Premium + Driver Feedback (Beta)	Pro	ProPlus
Asset Inspection	✔	✔	✔	✔	✔
US Federal Regulations (§396)	✔	✔	✔	✔	✔
Canadian Regulations (NSC 13)	✔	✔	✔	✔	✔
Drive App Hours of Service (HOS)	✘	✘	✘	✔	✔
US Federal Interstate Regulations (§395) US property/passenger 60-hour/7-day & 70-hour/8-day US property/passenger short-haul 16-hour day support	✘	✘	✘	✔	✔
Select US Intrastate Regulations California property/passenger intrastate	✘	✘	✘	✔	✔
Canadian Federal ELD	✘	✘	✘	BETA	✔
Automatic duty status changes	✘	✘	✘	✔	✔
Adverse weather condition support	✘	✘	✘	✔	✔
Oil industry exemption support	✘	✘	✘	✔	✔
Yard Move and Personal Conveyance support	✘	✘	✘	✔	✔
Driver identification and co-driver support	✘	✔	✔	✔	✔
Works alongside other third-party applications installed on mobile device/tablet	✔	✔	✔	✔	✔
2-way messaging	✔	Coming soon	Coming soon	BETA	BETA
Dispatch zone, address, or route to vehicle via messaging	BETA	Coming soon	Coming soon	BETA	BETA
Rules-based driver feedback via messaging	BETA	Coming soon	Coming soon	BETA	BETA
Navigation using built-in mobile device/tablet application or third-party navigation	Limited/BETA	Coming soon	Coming soon	BETA	BETA
Automatic driver-to-vehicle pairing when logged in to the Drive App.	BETA	Coming soon	Coming soon	BETA	BETA
Drive App Add-Ins	BETA	✔	✔	✔	✔
Privacy Mode	✔	✔	✔	✔	✔

Expansion

	Base	GM Premium	GM Premium + Driver Feedback (Beta)	Pro	ProPlus
Custom Add-In integrations available	✔	✔	✔	✔	✔
Access partner Add-Ons and solutions through the Marketplace (additional cost may apply)	✔	Limited	Limited	✔	✔
Advanced Software Development Kit (SDK) supporting full integration and customization (C# & Javascript integration, full AJAX/JSON interface)	✔	✔	✔	✔	✔
IOX-KEYLESS	✘	✘	✘	✘	✔
Monitor auxiliary input events — door open/close, sensors, etc. via IOX-AUXM	✔	✘	✘	✔	✔
In-vehicle alert and notification via IOX-ALERT	✔	✘	✘	✔	✔
In-vehicle verbal coaching via IOX Device Available in English, German, Spanish, French, Italian	✔	✘	✘	✔	✔
Driver ID via IOX-NFCREADER	✔	✘	✘	✔	✔
Loud buzzer via IOX-BUZZ	✔	✘	✘	✔	✔
USB power for mobile devices and tablets via IOX-USB	✔	✘	✘	✔	✔
One-way HOS data transfer via IOX-USB	✘	✘	✘	✔	✔
Two-way data transfer via IOX-USB* * Contact your reseller to enable this feature	✘	✘	✘	✘	✔
Iridium satellite connection via IOX-SATIRDv2	EXTRA	✘	✘	EXTRA	EXTRA
Bluetooth^® beacon monitoring via IOX-BT	✘	✘	✘	✘	✔
DICKEY-john® Control Point control system (via the IOX-DJ)	✘	✘	✘	✘	✔
Rexroth® Compu-Spread® CS440 and CS550 controllers (via the IOX-COMSPREAD)	✘	✘	✘	✘	✔
Cirus Controls® SpreadSmart Rx® controllers (via the IOX-CRS)	✘	✘	✘	✘	✔
FORCE^® AMERICA 5100ex^® Spreader Control systems (via the IOX-FAM)	✘	✘	✘	✘	✔
Public Works solution with spreader controllers	✘	✘	✘	✘	ProPlus + Public Works
Public Works solution	✔	✘	✘	✔	✔
Read third-party serial data via IOX-RS232M/F	✘	✘	✘	✘	✔
Read third-party data over the CAN bus via IOX-CAN	✘	✘	✘	✘	✔
Mobileye integration via IOX-CAN	✘	✘	✘	✘	✔
Refer monitoring with Valor wireless temperature sensors (requires IOX-CAN)	✘	✘	✘	✔	✔
Tire Pressure Monitoring Systems (TPMS) integration with Valor wireless sensors (requires IOX-CAN)	✘	Integration not required as data is reported in the data set	Integration not required as data is reported in the data set	✘	✔
Lone worker and man down solutions with Grace Industries integrated devices (requires additional IOXs)	✘	✘	✘	✘	✔
Associate HID card to vehicle using RFID via IOX-HID	✘	✘	✘	✘	✔
Monitor analog auxiliary inputs — fuel levels, temperature, PTO detection, etc. via IOX-ANALOG	✘	✘	✘	✘	✔
Control a remote relay in the vehicle with IOX-OUTPUTM	✔	✘	✘	✔	✔
Driver feedback through IOX-GOTALK	✔	✘	✘	✔	✔

IOX-UREADER

	Base	GM Premium	GM Premium + Driver Feedback (Beta)	Pro	ProPlus
Tachograph (only for Europe)
Driver ID	✔	✘	✘	✔	✔
Remote Download (RDL) of logs, as well as vehicle and driver information	✔	✘	✘	✔	✔
Real-time status and tachograph data (TAC)	✘	✘	✘	✔	✔
Infraction Management (AFA)	✘	✘	✘	✘	✔
CAN Clamp	✘	✘	✘	BETA	BETA
Cold Chain	✘	✘	✘	✘	✘
Temperature and other telemetry	✘	✘	✘	✔	✔
2-Way communication (temperature set point, alarm clearing)	✘	✘	✘	✔	✔

Garmin Support and IOX-GARMINNT

	Base	GM Premium	GM Premium + Driver Feedback (Beta)	Pro	ProPlus
Dispatch vehicle to zone or address	✘	✘	✘	✔	✔
Send multiple routes and auto-select next	✘	✘	✘	✔	✔
2-way messaging	✘	✘	✘	✔	✔
Set driver status	✘	✘	✘	✔	✔
Can use Drive App on Android OS-based Garmins	✘	✘	✘	✔	✔
Truck-specific features (road speed, sharp turn, red light camera) and routing	✘	✘	✘	✔	✔
IOX-Garmin can power Garmin device	✘	✘	✘	✔	✔
Garmin Hours of Service (HOS)	✘	✘	✘	✔	✔
US Federal Interstate Regulations (§395) US property/passenger 60-hour/7-day & 70-hour/8-day 16-hour day support	✘	✘	✘	✔	✔

Device

	Base (GO)	GM Premium	GM Premium + Driver Feedback (Beta)	Pro (GO)	ProPlus (GO)
End-to-end security using authentication, encryption, message integrity verification, individualized devices with unique IDs, non-static security keys, and digitally-signed firmware.	✔	✔	✔	✔	✔
Patented advanced trip recording for accurate vehicle location and distance traveled	✔	N/A	N/A	✔	✔
Wi-Fi Hotspot Functionality (additional monthly rate applies. Select regions only)	✘	✘	✘	✘	ProPlus + Wi-Fi
Internal GPS antenna	✔	✔	✔	✔	✔
Position instantly available after cold start (ephemeris)	✔	Acquired in <30 sec	Acquired in <30 sec	✔	✔
Simple to install	✔	✔ No Additional hardware needed	✔ No Additional hardware needed	✔	✔
Installation record (date/time/location) when unit connected	✔	✘	✘	✔	✔
Device tampering/removal detection with date/time/location stamp	✔	✘	✘	✔	✔
Voltage monitoring on crank (indicates electrical battery health)	✘	✘	✘	✔	✔
Battery voltage monitoring via regular heartbeats when ignition is off (identifies battery drain — door open/light left on)	✘	✘	✘	✔	✔
Self-calibrating accelerometer — no vehicle setup required	✘	✔	✔	✔	✔
Detect towing events (moving with ignition off)	✘	✘	✘	✔	✔
False positive filtering (i.e. does not record railroad tracks, speed bumps or potholes as aggressive driving)	✘	✔	✔	✔	✔
Collision data memory buffer records over 100 minutes of second-by-second data — auto detection and upload of last 1.2 minutes on collision	✘	✘	✘	✔	✔
On-device memory for logging out-of-coverage situations	Up to 1 month of driving data	Upto 10 hours of driving data	Upto 10 hours of driving data	Up to 1 month of driving data	Up to 1 month of driving data
Automatic OBD/CAN protocol detection at device install	✔	✘	✘	✔	✔
Automatic VIN readout	✔	✘	✘	✔	✔
Estimated odometer and engine hours (not based on engine data)	✔	✘ (engine data available)	✘ (engine data available)	✔	✔
Actual engine hours, engine road speed & odometer from engine	✘	✔	✔	✔	✔
Over-the-air firmware updates	✔	✔	✔	✔	✔
Over-the-air plan upgrades	✔	✔	✔	✔	✔
Over-the-air parameter modifications	✔	✔	✔	✔	✔
IP indemnification	✔	Limited (applicable only to MyGeotab)	Limited (applicable only to MyGeotab)	✔	✔
Limited lifetime warranty* *Certain conditions apply.	✘	✘	✘	✘	✔

Active Tracking — Live Vehicle Location

	Base	GM Premium	GM Premium + Driver Feedback (Beta)	Pro	ProPlus
Real-time audible alerts or verbal coaching for rules-based driver feedback	✘	✘	✔	✘	✔
Map updated with live vehicle movement	✘	✘	✘	✘	✔

This solution is available for GM vehicles domiciled in the US and Canada.

We are continuously adding support for more features and data to GM Premium. This document reflects the latest features and data set available. If you are interested in a specific feature which is currently unavailable, please contact your Geotab Partner.

Please refer to the Frequently Asked Questions to learn more about how MyGeotab reports work with GM plans.

Frequently Asked Questions

What is the data reporting frequency for GM Premium and GM Premium + DriverFeedback plan? Does that affect reports on MyGeotab?

For both plans, data is reported every 30 seconds. This can affect some of the MyGeotab reports. For example:

Trips - The trip history on the map may not appear very smooth around corners and turns.
Speeding - Speeding events which occur only between the two data recording intervals (30 seconds) will not be captured.
Distance - Distance is calculated based on GPS records. So if the vehicle is following a curve, the distance calculation will be slightly lower than actual.
Seatbelt exceptions - Default MyGeotab seatbelt rule will trigger an exception every time the speed crosses 10km/hr when the seatbelt was unbuckled. As the OEM device reports speed data only every 30 seconds, it may appear to cross the 10 km/hr threshold less number of times as compared to a device which has more granular reporting. Hence, the seat belt exception counts may be different.

Is the watchdog report expected to work for this solution?

Yes, the watchdog report is supported for this solution, however the reporting will be slightly different than a GO device. A heartbeat signal is sent by the device every 24 hours of vehicle inactivity. However, to preserve the vehicle’s battery power, the heartbeat signal is turned off in case a device remains inactive for a certain period of time (10 days in most cases). In these cases, the device will appear as non communicating.

How are Hard Acceleration and Harsh Braking events detected?

Forward acceleration (hard acceleration) data is available from the device when acceleration is above 0.14G. Backward acceleration (harsh braking) data is available from the device when acceleration is below -0.14G. Users can set thresholds beyond these values on MyGeotab so that an exception is generated every time the acceleration value crosses the desired threshold. Please note that exceptions will only be generated if the rule is enabled as well as depending on the threshold set in that rule.

Can I expect to see the data even before the vehicle is marked as ‘Sold’ in GM systems?

Yes, this is available on both GM plans and is possible via the ‘Pre-Delivery’ feature offered by GM. The vehicle has to be registered with Geotab using the standard steps mentioned in the partner guide and you can expect to see data for the vehicle in MyGeotab. More details are available in Pre-Delivery Feature documentation.

Can I use driver feedback (In Vehicle Coaching / IVC) with GM OEM devices?

Yes, this feature is available on ‘GM Premium + DriverFeedback’ plan via the ‘In Vehicle Coaching (IVC)’ feature offered by GM. The vehicle has to be registered with Geotab using the standard steps mentioned in the partner guide and the feature needs to be enabled in MyGeotab. More details are available in Driver Feedback Feature documentation.

Ask the Community

Connect with Geotab product experts in the Community